MD20060 $MC_AXCONF_GEOAX_NAME_TAB [n] (geometry axis in the channel)
The names for channel and geometry axes are used in the part program for programming
general traversing movements and to describe the workpiece contour.
● Path axes
● Synchronized axes
● Positioning axes
● Command axes
● Spindles
● Gantry axes
● Coupled axes
● Guide value coupling axes
7.3.3
Drive assignment
Drive assignment
The assignment of machine axes to the SERVO drive objects is realized using machine data.
Figure 7-3
Drive assignment
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
NC commissioning
7.3 Configuring machine axes
153