Example WPS Process: PBC Method
Wireless Client
4.3.3 Connecting to the EMG's Wi-Fi Network Manually (No WPS)
In this example, we change the EMG's wireless settings, and then manually select the EMG's new SSID
and enter the Wi-Fi key to connect a wireless client to the EMG.
4.3.4 Configuring Wireless Security on the EMG
This section shows you how to configure wireless security settings with the following parameters on your
EMG.
Frequency Band
SSID
Channel
Security
Follow the steps below to configure the wireless settings on your EMG.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
Go to the Network Setting > Wireless > WiFi > Edit screen to enable the 2.4 GHz wireless network.
1
Chapter 4 Tutorials
WITHIN 2 MINUTES
SECURITY INFO
2.4 GHz
SSID_Example
Auto
WPA2-PSK
(Wireless Password: ThisismyWPA-PSKpre-sharedkey)
EMG6726/8726-B10A User's Guide
44
COMMUNICATION
Section 2.2 on page
EMG
WPS
Press and hold for
more than 5 seconds
29).