Resetting The Zyxel Device; Figure 7 Select Mode Screen - ZyXEL Communications P-2302HW-P1 Series User Manual

Figure 7 Select Mode Screen

6 In the Options screen,
• Click Go to Wizard setup if you are logging in for the first time or if you want to make
basic changes. See
• Click Go to Advanced setup if you want to configure features that are not available in
the wizards. The main screen appears. See
• Click Exit if you want to log out.
Note: For security reasons, the ZyXEL Device automatically logs you out if you do not
use the web configurator for five minutes. If this happens, log in again.

2.3 Resetting the ZyXEL Device

Reset the ZyXEL Device in the following situations:
• You forgot your password.
• You cannot access the device using the web configurator. Check Troubleshooting in the
Quick Start Guide to make sure you cannot access the device anymore.
If you reset the ZyXEL Device, you lose all of the changes you have made. The ZyXEL
Device re-loads its default settings, and the password resets to "1234". You have to make all of
your changes again.
Note: You will lose all of your changes when you push the RESET button.
To reset the ZyXEL Device,
1 Make sure the POWER LED is on and not blinking.
Chapter 2 Introducing the Web Configurator
Chapter 3 on page 51 for more information.
P-2302HW/HWL-P1 Series User's Guide
Section 2.4 on page 46 for more information.
45