Table of Contents
Advertisement
2.1 Overview
This chapter describes how to access the EMG2881-T20A Web Configurator and provides an overview of
its screens.
The Web Configurator is an HTML-based management interface that allows easy setup and
management of the EMG2881-T20A via Internet browser. Use Internet Explorer 9.0 and later versions,
Mozilla Firefox 21 and later versions, Safari 6.0 and later versions or Google Chrome 26.0 and later
versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
Refer to the Troubleshooting chapter
are allowed in Internet Explorer.
2.2 Accessing the Web Configurator
Make sure your EMG2881-T20A hardware is properly connected and prepare your computer or
1
computer network to connect to the EMG2881-T20A (refer to the Quick Start Guide).
Launch your web browser.
2
The EMG2881-T20A is in router mode by default. Type "http://192.168.1.1" as the website address.
3
Your computer must be in the same subnet in order to access this website address.
2.2.1 Login Screen
The Web Configurator initially displays the following login screen.
Type the default Username admin and randomly assigned default password (see the device label) in
the Login screen and click Login.
Introducing the Web
(Chapter 12 on page
EMG2881-T20A User's Guide
16
C
H A P T E R
Configurator
106) to see how to make sure these functions
2
Advertisement
Table of Contents
