Ip Routing Policy Setup; Figure 38-1 Ip Routing Policy Setup - ZyXEL Communications ZyWall 10W User Manual

ZyWALL Series Internet Security Gateway
is to differentiate between interactive and bulk traffic. Interactive applications, e.g., telnet, tend to have
short packets, while bulk traffic, e.g., file transfer, tends to have large packets.
The actions that can be taken include:
•
Routing the packet to a different gateway (and hence the outgoing interface).
•
Setting the ToS and precedence fields in the IP header.
IPPR follows the existing packet filtering facility of RAS in style and in implementation. The policies are
divided into sets, where related policies are grouped together. A user defines the policies before applying
them to an interface or a remote node, in the same fashion as the filters. There are 4 policy sets with six
policies in each set.

38.4 IP Routing Policy Setup

Menu 25 shows all the policies defined.
To setup a routing policy, perform the following procedures:
Step 1. Type 25 in the main menu to open Menu 25 – IP Routing Policy Setup.
Step 2. Type the index of the policy set you want to configure to open Menu 25.1 – IP Routing Policy
Setup.
38-2
Menu 25 - IP Routing Policy Setup
Policy
Set #
------ -----------------
1 _______________
2 _______________
3 _______________
4 _______________
Enter Policy Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel:

Figure 38-1 IP Routing Policy Setup

Name
IP Policy Routing