Wan Dhcp; Figure 303 Menu 24.4: System Maintenance: Diagnostic; Figure 304 Wan & Lan Dhcp - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 User's Guide
1 From the main menu, select option 24 to open Menu 24 - System Maintenance.
2 From this menu, select option 4. Diagnostic. This will open Menu 24.4 - System
Maintenance - Diagnostic.

Figure 303 Menu 24.4: System Maintenance: Diagnostic

37.5.1 WAN DHCP

DHCP functionality can be enabled on the LAN or WAN as shown in
has already been discussed. The ZyWALL can act either as a WAN DHCP client (IP Address
Assignment field in menu 4 or menu 11.x.2 is Dynamic and the Encapsulation field in
menu 4 or menu 11 is Ethernet) or None, (when you have a static IP). The WAN Release
and Renewal fields in menu 24.4 conveniently allow you to release and/or renew the assigned
WAN IP address, subnet mask and default gateway in a fashion similar to winipcfg.
Figure 304 WAN & LAN DHCP
The following table describes the diagnostic tests available in menu 24.4 for your ZyWALL
and associated connections.
488
Menu 24.4 - System Maintenance - Diagnostic
TCP/IP
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. Internet Setup Test
System
11. Reboot System
Enter Menu Selection Number:
WAN=
Host IP Address= N/A
Figure
Chapter 37 System Information & Diagnosis
304. LAN DHCP