Figure 105 Menu 11.1 Remote Node Profile For Ethernet Encapsulation; Table 69 Menu 11.1 Remote Node Profile For Ethernet Encapsulation - ZyXEL Communications Prestige 2302R User Manual

Prestige 2302R Series User's Guide

Figure 105 Menu 11.1 Remote Node Profile for Ethernet Encapsulation

Rem Node Name= MyISP
Active= Yes
Encapsulation= Ethernet
Service Type= Standard
Service Name= N/A
Outgoing:
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Server= N/A
The following table describes the fields in this menu.

Table 69 Menu 11.1 Remote Node Profile for Ethernet Encapsulation

FIELD
Rem Node Name
Active
Encapsulation
Service Type
Outgoing
My Login
My Password
Retype to Confirm
Server
Route
Edit IP
Session Options
194
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Enter a descriptive name for the remote node. This field can be up to eight
characters.
Press [SPACE BAR] and then [ENTER] to select Yes (activate remote node) or
No (deactivate remote node).
Ethernet is the default encapsulation. Press [SPACE BAR] and then [ENTER] to
change to PPPoE or PPTP encapsulation.
Press [SPACE BAR] and then [ENTER] to select from Standard, RR-Toshiba
(RoadRunner Toshiba authentication method), RR-Manager (RoadRunner
Manager authentication method), or RR-Telstra. Choose one of the RoadRunner
methods if your ISP is Time Warner's RoadRunner; otherwise choose Standard.
This field is applicable for PPPoE encapsulation only. Enter the login name
assigned by your ISP when the Prestige calls this remote node. Some ISPs
append this field to the Service Name field above (e.g., jim@poellc) to access the
PPPoE server.
Enter the password assigned by your ISP when the Prestige calls this remote
node. Valid for PPPoE encapsulation only.
Type your password again to make sure that you have entered it correctly.
This field is valid only when RoadRunner is selected in the Service Type field.
The Prestige will find the RoadRunner Server IP automatically if this field is left
blank. If it does not, then you must enter the authentication server IP address
here.
This field refers to the protocol that will be routed by your Prestige – IP is the only
option for the Prestige.
This field leads to a "hidden" menu. Press [SPACE BAR] to select Yes and press
[ENTER] to go to Menu 11.3 - Remote Node Network Layer Options.
Route= IP
Edit IP= No
Session Options:
Edit Filter Sets= No
Edit Traffic Redirect= No
Chapter 21 Remote Node Configuration