Chapter 2 Tutorials
Figure 3 AP: Wireless LAN
2 Make sure the Active Wireless LAN check box is selected.
3 Enter "SSID_Example3" as the SSID and select a channel which is not used by another
AP.
4 Set security mode to WPA-PSK and enter "ThisismyWPA-PSKpre-sharedkey" in the
Pre-Shared Key field. Click Apply.
5 Click the Advanced Setup tab and select 54g Auto in the 54g
Apply.
Figure 4 AP: Wireless LAN > Advanced Setup
6 Open the Status screen.Verify your wireless and wireless security settings under Device
Information and check if the WLAN connection is up under Interface Status.
32
TM
Mode field. Click
P-870HW-51a v2 User's Guide