Figure 2-10 Configure Dynamic Dns; Table 2-5 Configure Dynamic Dns Menu Fields - ZyXEL Communications Prestige 314 User Manual

Service Provider = WWW.DynDNS.ORG
Active= Yes
Host=
EMAIL=
User=
Password= ******
Enable Wildcard= No
Follow the instructions in the next table to configure Dynamic DNS parameters.
FIELD
Service Provider This is the name of your Dynamic DNS client. This field is read-
only.
Active Press [SPACE BAR] to select either Yes or No.
Host Enter the domain name assigned to your Prestige by your
Dynamic DNS provider.
EMAIL Enter your e-mail address.
User Enter your user name.
Password Enter the password assigned to you.
Enable Wildcard Your Prestige supports DYNDNS Wildcard. Press [SPACE
BAR] to select Yes or No.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.
The IP address will be updated when you reconfigure menu 1 or perform DHCP client renewal.
Hardware Installation & Initial Setup
Prestige 314 Broadband Sharing Gateway with 4-Port Switch
Menu 1.1 - Configure Dynamic DNS
Press ENTER to confirm or ESC to cancel:

Figure 2-10 Configure Dynamic DNS

Table 2-5 Configure Dynamic DNS Menu Fields

DESCRIPTION EXAMPLE
WWW.DynDNS.org
Yes
me.dyndns.org
mail@mailserver
Yes
2-13