19.1 Overview
This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your EMG1302-R10A from a remote location through
the following interfaces:
• LAN and WAN
• LAN only
Note: The EMG1302-R10A is managed using the Web Configurator.
19.2 What You Need to Know
Remote management over LAN or WAN will not work when:
The IP address in the Secured Client IP Address field
1
the client IP address. If it does not match, the EMG1302-R10A will disconnect the session
immediately.
There is already another remote management session. You may only have one remote
2
management session running at one time.
There is a firewall rule that blocks it.
3
19.2.1 Remote Management and NAT
When NAT is enabled:
• Use the EMG1302-R10A's WAN IP address when configuring from the WAN.
• Use the EMG1302-R10A's LAN IP address when configuring from the LAN.
19.3 What You Can Do
• Use the WWW screen to configure through which interface(s) and from which IP address(es)
users can use HTTP or HTTPs to manage the NBG4104
• Use the Telnet screen to configure through which interface(s) and from which IP address(es)
users can use Telnet to manage the EMG1302-R10A
EMG1302-R10A User's Guide
C
HAPTER
Remote Management
(Section 19.4 on page
(Section 19.4 on page
(Section 19.5 on page
1 9
136) does not match
136).
137).
135