Add Or Edit A Directory Server; Figure 135 Directory Server Add; Table 93 Directory Servers - ZyXEL Communications ZyWall 70 User Manual

The following table describes the labels in this screen.

Table 93 Directory Servers

LABEL
PKI Storage Space
in Use
#
Name
Address
Port
Protocol
Modify
Add

15.17 Add or Edit a Directory Server

Click CERTIFICATES, Directory Servers to open the Directory Servers screen. Click
Add (or the details icon) to open the following screen. Use this screen to configure
information about a directory server that the ZyWALL can access.

Figure 135 Directory Server Add

Chapter 15 Certificates
DESCRIPTION
This bar displays the percentage of the ZyWALL's PKI storage space that is
currently in use. The bar turns from green to red when the maximum is being
approached. When the bar is red, you should consider deleting expired or
unnecessary certificates before adding more certificates.
The index number of the directory server. The servers are listed in alphabetical
order.
This field displays the name used to identify this directory server.
This field displays the IP address or domain name of the directory server.
This field displays the port number that the directory server uses.
This field displays the protocol that the directory server uses.
Click the details icon to open a screen where you can change the information
about the directory server.
Click the delete icon to remove the directory server entry. A window displays
asking you to confirm that you want to delete the directory server. Note that
subsequent certificates move up by one when you take this action.
Click Add to open a screen where you can configure information about a directory
server so that the ZyWALL can access it.
ZyWALL 70 User's Guide
291