The Port Forwarding Add/Edit Screen - ZyXEL Communications AMG1312-T10D User Manual

Chapter 10 Network Address Translation (NAT)
Table 47 Network Setting > NAT > Port Forwarding (continued)
LABEL
Active
Service Name
External Start Port
External End Port
Internal Start Port
Internal End Port
Server IP Address
Modify
Apply
Cancel

10.3.2 The Port Forwarding Add/Edit Screen

This screen lets you create or edit a port forwarding rule. Click Add new rule in the Port
Forwarding screen or the Edit icon next to an existing rule to open the following screen.
Figure 85 Port Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 48 Port Forwarding: Add/Edit
LABEL
Active
Service Name
120
DESCRIPTION
This field indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not
active.
This is the service's name. This shows User Defined if you manually added a service.
You can change this by clicking the edit icon.
This is the first external port number that identifies a service.
This is the last external port number that identifies a service.
This is the first internal port number that identifies a service.
This is the last internal port number that identifies a service.
This is the server's IP address.
Click the Edit icon to edit the port forwarding rule.
Click the Delete icon to delete an existing port forwarding rule. Note that subsequent
address mapping rules move up by one when you take this action.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Select or clear this field to turn the port forwarding rule on or off.
Select a service to forward or select User Defined and enter a name in the field to the
right.
AMG1312-T10D User's Guide