Error Codes - Ricoh D017 Service Manual

3. TROUBLESHOOTING

3.1 ERROR CODES

If an error code occurs, retry the communication. If the same problem occurs, try to fix the
problem as suggested below. Note that some error codes appear only in the error code
display and on the service report.
Code Meaning
DIS/NSF not detected
0-00 within 40 s of Start being
pressed
DCN received
0-01
unexpectedly
Incompatible modem at
0-03
the other end
SM
Suggested Cause/Action
Check the line connection.
Check the NCU - FCU connectors.
The machine at the other end may be
incompatible.
Replace the NCU or FCU.
Check for DIS/NSF with an oscilloscope.
If the rx signal is weak, there may be a bad
line.
The other party is out of paper or has a
jammed printer.
The other party pressed Stop during
communication.
The other terminal is incompatible.
19
Error Codes
D361/D510