Pto Clutch Replacement - Toro TIMECUTTER 74685 Service Manual

PTO Clutch Replacement

PTO Clutch Removal
PTO Clutch Installation
TIMECUTTER® Service Manual
3433-938 Rev A
1. Park the machine on a level surface and set the parking brake. Stop the
engine, wait for all moving parts to stop and remove the key.
2. Disconnect the battery by removing the negative battery cable first, then
the positive cable from the battery.
3. Using an appropriate lifting device, raise the machine. Remove the deck
belt from the clutch pulley.
4. Disconnect the wiring to the clutch.
g300624
5. Remove the 5/8 hex bolt securing the clutch to the crankshaft of the engine.
Remove the clutch.
g300625
1. Install the clutch. Install the 5/8 hex bolt securing the clutch to the crankshaft
of the engine. Torque bolt to 67.5–81 N • m (50–60 ft-lb).
Figure 269
Figure 270
Page 8–5 Electrical System: Service and Repairs