Wheel Motors - Toro Groundsmaster 7210 Service Manual

Wheel Motors

g033415
1. Locknut
2. Lug nut (5 each per wheel)
3. Wheel assembly
4. Wheel hub
5. Wheel stud (5 each per wheel)
6. Socket-head screw (4 each per
motor)
7. Wheel motor (left)
Removing the Wheel Motor
Groundsmaster 7210
16222SL Rev C
8. Woodruff key
9. O-ring
10. Hydraulic fitting
11. O-ring
12. Hydraulic fitting
13. Hydraulic hose
14. Hydraulic hose
Before disconnecting or doing any work on the hydraulic system,
release all the pressure in the system; refer to
from the Hydraulic System (page
1. Park the machine on a level surface, lower the cutting deck (or implement),
shut off the engine, set the parking brake, and remove the key from the
key switch.
Figure 55
15.
16.
17.
18.
19.
WARNING
4–11).
Page 4–65
Brake caliper (left)
Flange nut (4 each per side)
Bolt (2 each per side)
Bolt (2 each per side)
Brake support
Releasing Pressure
Hydraulic System: Service and Repairs