Pto Switch - Toro Groundsmaster 7210 Service Manual

PTO Switch

Groundsmaster 7210
16222SL Rev C
g034742
1. PTO switch
g033647
1. COM B terminal
2. NO B terminal
3. NC B terminal
The PTO switch is located on the control panel
switch to engage the PTO (cutting deck or implement).
The Standard Control Module (SCM) monitors the position of the PTO switch
(up or down). Using the inputs from the PTO switch and other switches in the
interlock system, the SCM controls the energizing of the transmission solenoid
valve and thus, the PTO. If the key switch is in the O
switch is engaged, the SCM PTO switch input LED should be illuminated.
Figure 150
2. Control panel
Figure 151
4. COM C terminal
5. NO C terminal
6. NC C terminal
Page 5–25 Electrical System: Testing the Electrical Components
(Figure 150). Pull up the PTO
position and the PTO
N