Toro Groundsmaster 7210 Service Manual page 226

Testing the Seat Switch (continued)
Electrical System: Testing the Electrical Components
To prevent injury, do not attempt to reach the switch through
openings in the seat plate.
If seat switch service is necessary, remove the seat from the seat
plate to access the switch.
F. If the continuity test is incorrect, remove the seat; refer to the
Seat (page 6–35). Check the seat switch and/or seat switch harness for
continuity. Repair or replace the components as necessary.
G. If the seat switch testing is correct and the circuit problem still exists,
check the machine wire harness; refer to the Electrical Schematics and
Wire Harness Drawings/Diagrams in Appendix A—Foldout Drawings.
H. After you complete the seat switch testing, connect the machine wire
harness connector to the seat switch electrical lead. Lower the seat
assembly. Check the operation of the seat switch.
Page 5–30
WARNING
Operator
Groundsmaster 7210
16222SL Rev C