Wheel Motors - Toro Groundmaster Series Service Manual

Wheel Motors

Front Wheel Motors
g303210
1. Front wheel motor
2. Elbow fitting
3. Elbow fitting
4. Woodruff key
5. Cap screw (4 each)
6. Wheel hub
Hydraulic System: Service and Repairs
7. Brake drum
8. Wheel hub nut
9. Brake plate assembly
10. Cap screw (4 each)
11. Brake adapter
12. Washer
Removing the Front Wheel Motors
Refer to Figure 58 for this procedure.
1. Remove the front wheel; refer to
7–5).
2. Disengage the parking brake and remove the brake return spring, cotter pin,
clevis pin and washer that attach the brake cable to the brake actuator lever.
3. Remove the brake drum.
4. Use a torque multiplier and remove the wheel hub nut.
5. Use a wheel hub puller for a 114 mm (4.5 inch) bolt circle and remove the
wheel hub and woodruff key.
6. Remove the brake plate assembly from the machine.
7. Read and adhere to the information provided in
Removing and Installing the Hydraulic System Components (page
Figure 58
13.
14.
15.
16.
17.
Removing and Installing the Wheels (page
Page 5–82
Clevis pin
Return spring
Cotter pin
Spring clip
Lock nut (4 each)
General Precautions for
5–52).
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A