Standard Control Module Logic Chart - Toro Groundsmaster 7210 Service Manual

Standard Control Module Logic Chart

Groundsmaster 7210
16222SL Rev C
Each line of the following chart
position (inputs) in order for the SCM to energize the appropriate outputs for
operating the machine.
Example: To start the engine with an operator in the seat, when the key is in the
position, the 2 traction control levers in the N
START
parking brake is not set, the engine components and engine starter is energized.
During the operation of the machine, if the PTO shuts down and the
console temperature warning light illuminates, avoid shutting off the
engine. Under this condition, push the PTO knob down, slowly drive
to a safe flat area, move the throttle lever to the S
the traction control levers into the N
the parking brake. Allow the engine to be idle for several minutes
while it cools to a safe level, and check the cooling system before
returning the machine to service.
(Figure 135) identifies the necessary component
IMPORTANT
EUTRAL LOCK
Page 5–5
position, and the
EUTRAL LOCK
position, move
LOW
position, and set
Electrical System: General Information