Toro Groundsmaster 7210 Service Manual page 156

Assembling the Transmission (continued)
Hydraulic System: Service and Repairs
g033460
1. Input shaft
2. Right pump shaft
16. Install the right and left pump shaft assemblies into the transmission pump
housing, and install the input shaft into the pump housing.
Note: Ensure that the gear teeth of the input shaft is aligned with the gears
on the PTO and pump shafts.
17. Lubricate the 2 new O-rings and install the O-rings into the grooves in the
pipe. Slide the pipe assembly into the bore of the transmission pump housing.
g033461
1. Gear case housing
2. Pump housing
18. Install the 2 pins into the transmission pump housing holes. Align new gasket
to the housing.
Figure 100
3. Left pump shaft
4. Pipe assembly
Figure 101
3. Pin (2 each)
Page 4–96 Groundsmaster 7210
16222SL Rev C