Toro Groundsmaster 7210 Service Manual page 152

Assembling the Transmission (continued)
Hydraulic System: Service and Repairs
g033452
1. Socket head plug
2. Hex plug
6. Lubricate new O-rings and install the O-rings onto the socket head plug and
hex plug. Install both the plugs into the transmission pump housing; torque
the plugs to 23 to 26 N∙m (17 to 19 ft-lb).
g033453
1. Bearing
2. PTO gear
7. Install the retaining ring into the groove in the PTO gear bore. Press both
the bearings into the PTO gear until each bearing contacts the retaining
ring that is installed.
Figure 92
3. Pump housing
Figure 93
3. Retaining ring
Page 4–92 Groundsmaster 7210
16222SL Rev C