Toro Groundsmaster 7210 Service Manual page 283

Assembling the Front Castor Wheels (continued)
Groundsmaster 7210
16222SL Rev C
Note: Periodic greasing of the castor fork bearing area is not necessary.
Do not replace the plug (item 8 in
grease cap (item 19 in
grease installed.
8. Install new grease cap (item 19 in
flush with the top of the carrier frame.
Note: There should be no evidence that the cap is indented by the top of
the castor fork.
9. Position the castor wheel to the castor fork and secure the wheel with the
bolt and locknut.
10. Lower the machine to the ground.
Figure 196) with a grease fitting. The
Figure 196) will loosen if the castor fork has excessive
Figure 196) so that the cap shoulder is
Page 6–21 Chassis: Service and Repairs