Toro Groundsmaster 7210 Service Manual page 165

Assembling the Transmission (continued)
Groundsmaster 7210
16222SL Rev C
55. Place the pin in the spool.
56. Install the solenoid valve stem into the pump body and torque the solenoid
valve stem to 21 to 22 N∙m (186 to 195 in-lb).
57. Install the O-ring, solenoid coil, O-ring, washer, lock washer, and nut onto the
solenoid valve stem; torque the nut to 5.9 to 7.8 N∙m (52 to 69 in-lb).
Note: The coil should be installed so that the "KANZAKI" molded into the coil
has the "I" nearest the nut location.
Page 4–105 Hydraulic System: Service and Repairs