Polar Trac Wheels - Toro Groundsmaster 7210 Service Manual

Polar Trac Wheels

g033678
1. Front frame
2. Bogie assembly
3. Locknut
4. Rear wheel hub (left)
5. Wheel assembly (6 each)
6. Wheel lug nut (5 each per wheel)
Removing the Polar Trac Wheels
Chassis: Service and Repairs
7. Drive track
8. Woodruff key
9. Wheel stud (5 each per hub)
10. Rear wheel motor (left)
11. Parking brake (left)
12. Screw (4 each per motor)
Note: Refer to the Polar Trac Operator's Manual for additional information
regarding the drive track and wheel removal.
1. Park the machine on a level surface, lower the implement, shut off the
engine, and remove the key from the key switch.
Note: When removing the wheels from a Polar Trac equipped machine,
remove the center wheel first to allow track clearance for the front or rear
wheels.
Figure 185
13.
14.
15.
16.
17.
Page 6–6
Locknut
Flat washer
Hex nut
Bogie pivot assembly (left)
Wheel stud (5 each per hub)
Groundsmaster 7210
16222SL Rev C