Battery Hydrometer; Dielectric Gel - Toro Groundsmaster 7210 Service Manual

Battery Hydrometer

Dielectric Gel

Electrical System: Special Tools
g033640
Use the battery hydrometer when measuring the specific gravity of the battery
electrolyte. You can get this tool locally.
g033639
Use the dielectric gel to prevent corrosion of unsealed connection terminals. To
ensure complete coating of the terminals, liberally apply the gel to the component
and wire harness connector, plug the connector into the component, unplug
the connector, apply the gel to both surfaces again, and connect the harness
connector to the component again. The connectors must be fully packed with
gel for effective results.
Note: Do not use the dielectric gel on the sealed connection terminals as the
gel can unseat the connector seals during assembly.
Toro Part No. 107-0342
Figure 139
Figure 140
Page 5–10 Groundsmaster 7210
16222SL Rev C