Toro Groundsmaster 7210 Service Manual page 153

Assembling the Transmission (continued)
Groundsmaster 7210
16222SL Rev C
g033454
1. Rod (3 each)
2. Clutch assembly
8. Slide the 3 rods into the holes in the clutch assembly.
9. Slide the PTO gear assembly into the clutch assembly.
g033455
1. Seal ring (2 each)
2. PTO shaft
3. B-plate
4. C-plate
10. Assemble the PTO shaft assembly as follows:
A. Press new bearing onto the PTO shaft so that the bearing is flush with
the shaft shoulder.
B. Alternately place the 3 A-plates and 3 friction plates onto the PTO shaft.
C. Place the C-plate and then the B-plate onto the shaft.
D. Carefully install the 2 seal rings into the grooves of the PTO shaft.
Figure 94
3. PTO gear assembly
Figure 95
5. A-plate (3 each)
6. Friction plate (3 each)
7. Bearing
Page 4–93 Hydraulic System: Service and Repairs