Testing the Dual Temperature Switch (continued)
Fuses
Groundsmaster 7210
16222SL Rev C
B. Thread the switch into the housing; torque the switch to 29.4 to 39.2
N∙m (22 to 28 ft-lb).
C. Connect the harness wires to the temperature switch.
7. Fill the engine cooling system.
8. Lower the hood and secure it with the latches.
g034750
1.
Fuse F4 (2 A)
2.
Fuse F3 (10 A)
g034749
1.
ECU
The fuse block is located under the controller cover next to the operator seat.
Figure 171
3.
Fuse F2 (10 A)
4.
Fuse F1 (15 A)
Figure 172
2.
25 A fuse
Page 5–47
Electrical System: Testing the Electrical Components