Toro Groundsmaster 7210 Service Manual page 13

Maintenance and Service (continued)
Groundsmaster 7210
16222SL Rev C
•
If welding on the machine is necessary, disconnect all the battery cables to
prevent damage to the electrical system. Disconnect the negative battery
cable and then the positive cable.
•
Disconnect and remove the engine ECU from the machine.
•
At the time of manufacture, the machine conformed to the safety standards
for riding mowers. To ensure the optimum performance and continued
safety certification of the machine, use genuine Toro replacement parts and
accessories. The replacement parts and accessories of other manufacturers
can result in non-conformance with the safety standards and can void the
warranty.
•
When changing the attachments, tires, or performing other service, use
correct blocks, hoists, and jacks to raise and support the machine. Ensure
that the machine is parked on a solid level surface, such as a concrete floor.
Before you lift the machine, remove all the attachments that may interfere
with the safe and correct lift of the machine. Always block the wheels with
chocks. Use appropriate jack stands to support the raised machine. Failing
to properly support the machine with appropriate jack stands can cause the
machine to move or fall and can result in personal injury; refer to
Instructions (page 1–6).
Page 1–5
Jacking
Safety: Safety Instructions