Rollover Protection System
g035305
1.
Rear panel
2.
Swell latch (3 each)
3.
Screw (4 each)
4.
Rivet (4 each)
5.
Leaf spring (2 each)
Removing the Rollover Protection System
Groundsmaster 7210
16222SL Rev C
6.
Fold pin (2 each)
7.
Screw (2 each)
8.
Warning decal
9.
Nut (2 each)
10.
Double loop hairpin cotter (2 each)
1. Park the machine on a level surface, lower the cutting deck (or implement),
shut off the engine, set the parking brake, and remove the key from the
key switch.
2. Raise the operator seat.
Figure 209
11.
12.
13.
14.
Page 6–33
Locknut (3 each)
Flange nut (4 each)
Upper ROPS assembly
Cross-member assembly
Chassis: Service and Repairs