Toro Groundsmaster 7210 Service Manual page 150

Disassembling the Transmission (continued)
Hydraulic System: Service and Repairs
g033448
1. Side cover
2. O-ring
3. Pump housing
64. Remove the 3 socket-head screws that attach the 2 side covers to the
transmission pump housing.
65. Carefully slide the side covers from the trunnion shafts and housing.
66. Remove and discard the O-rings from the side covers.
67. Remove the retaining rings that attach the oil seals into the 2 side covers.
68. Remove and discard the oil seals from the side covers.
g033449
1. Swash plate (2 each)
2. Washer
69. Carefully remove the swash plates from the transmission pump housing, and
remove the washer from each swash plate.
70. Clean and inspect all the transmission components.
Figure 88
4. Retaining ring
5. Oil seal
Figure 89
3. Pump housing
Page 4–90 Groundsmaster 7210
16222SL Rev C