Service Screen; Settings Screen - Toro Groundsmaster 7210 Service Manual

Service Screen

Settings Screen

Electrical System: InfoCenter Display
The service screen contains operational information of the machine including
hours and counts. The values listed for these service menu items cannot be
changed. If the machine PIN has been entered to get access to the protected
menu items in the settings screen, the protected service menu items will be listed
and available in the service screen.
Note: If the protected menu items are available, the PIN is shown in the upper
right corner of the InfoCenter display.
The options listed for hours include the following:
•
Key On identifies the number of hours that the key switch has been in the
R position.
UN
•
DPF Regeneration provides the necessary procedure for stationary
regeneration for the exhaust system DPF (diesel-particulate filter) on the
machines with a Tier 4 engines (Models 30616, 30617, 30618, 30619, 30633,
and 30695). If the engine ECU identifies that a stationary DPF regeneration
is necessary, an advisory will occur on the InfoCenter and necessary steps
will be listed in the service screen menu.
g035032
1. Settings menu
2. Change menu item
3. Move to menu items
The settings screen (Figure
(English or Metric). The settings screen also allows the operator to customize
the backlight (brightness) and contrast settings for the InfoCenter display.
If either the backlight (brightness) or contrast items are selected, the center
button or right button can be used to change the display settings.
Protected menus allows the machine PIN to be entered so that the hidden
machine service screen items can be viewed and modified. The protected
service items include the exhaust system DPF regeneration (Tier 4 engines).
Figure 145
4. Back button
5. Settings items
145) identifies the InfoCenter language and units
Page 5–14 Groundsmaster 7210
16222SL Rev C