Toro Groundsmaster 7210 Service Manual page 272

Removing the Parking Brakes (continued)
Chassis: Service and Repairs
g033681
1. Parking brake assembly
2. Locknut
g033682
1. Wheel hub
2. Parking brake assembly
3. Locknut
4. Remove the retaining ring and flat washer that retains the brake rod assembly
to the parking brake lever. Separate the brake rod from the brake lever.
5. Remove the 4 bolts and 4 flange nuts that attach the brake support to the
frame.
6. Slide the brake support (with the parking brake assembly attached) from the
wheel hub disc and frame.
7. Remove the 2 locknuts that secure the parking brake assembly to the brake
support, and remove the brake from the support.
8. Locate and retrieve the 2 hardened washers from the parking brake and
brake support (Figure 188
Figure 188
3. Brake support
4. Hardened washer
Figure 189
4. Brake support
5. Hardened washer
and Figure 189).
Page 6–10 Groundsmaster 7210
16222SL Rev C