Toro Groundsmaster 7210 Service Manual page 52

Installing the Fuel Tanks (continued)
Diesel Engine: Service and Repairs
3. Assemble the fuel tanks to the frame of the machine with the screws (items
18 and 30 in Figure
and the flange nuts.
4. Align the fuel tank to the machine and secure the tank to the frame with a
screw, clamp, and flange nut (items 32, 25, and 26 in
5. If the right fuel tank was removed, carefully position the control panel onto
the fuel tank and secure the control panel with the 5 flange-head screws
(item 1 in Figure 15).
6. Assemble the access cover to the control panel and secure the cover with
the 2 swell latches (item 5 in
7. Install the fuel supply, return, and vent hoses to their appropriate locations
and secure with the hose clamps.
8. Connect the negative battery cable to the negative battery post.
9. Add fuel to the tank and prime the fuel system; refer to
System (page 3–18).
10. Check the fuel hoses and fittings for leaks.
Note: Repair all fuel leaks before operating the machine.
11. Lower the hood and secure it with the latches.
12. Lower the operator seat.
14), flat washers, plain washers, rubber washers, spacer,
Figure 15).
Page 3–20
Figure 14).
Priming the Fuel
Groundsmaster 7210
16222SL Rev C