Toro Groundsmaster 7210 Service Manual page 146

Disassembling the Transmission (continued)
Hydraulic System: Service and Repairs
g033440
1. Right pump shaft
2. Left pump shaft
50. If the pump shaft bearing replacement is necessary, remove and discard the
seal ring from the right and left pump shafts.
51. Use a bearing puller to remove the bearings from the pump shaft.
52. Discard the bearings that were removed, and remove the gear from the
pump shaft.
53. If the input shaft bearing replacement is necessary, use a bearing puller to
remove the bearings from the input shaft.
54. Discard the bearings that were removed, and remove the gear from the
input shaft.
g033441
1. PTO shaft assembly
Figure 80
3. Input shaft
4. Seal ring
Figure 81
2. Pump housing
Page 4–86 Groundsmaster 7210
16222SL Rev C