Toro Groundsmaster 7210 Service Manual page 56

Models with yanmar engine
Hide thumbs Also See for Groundsmaster 7210:
Table of Contents

Advertisement

Removing the Engine (continued)
Installing the Engine
Diesel Engine: Service and Repairs
13. Remove the 7 screws (item 17 in
the flywheel housing to the engine.
14. Remove the locknut (item 2 in
secures each side of the engine to the engine mounts that are attached
to the frame.
When removing the engine ensure that you do not damage the
engine, flywheel housing, fuel hoses, hydraulic lines, electrical
harness or other parts. Also, ensure that the transmission does
not shift during engine removal.
15. Support the transmission to prevent it from moving during engine removal.
Use 1 person to operate the lift or hoist while the other person
guides the engine from the machine.
16. Slide the engine backward a couple of inches to separate it from the
transmission input shaft. Carefully raise the engine from the machine.
17. If necessary, remove the 8 bolts (item 25 in
coupling to the engine, and remove the flywheel coupling from the engine.
Ensure that all parts removed from the engine during maintenance
or overhaul are correctly installed on the engine.
1. Apply anti-seize lubricant to the splines of the transmission input shaft.
2. If removed, install the flywheel coupling to the engine with the 8 bolts (item
25 in
Figure
16), apply red gel threadlocker to the bolts, and torque the bolts
to 25.8 to 29.8 N·m (19 to 22 ft-lb).
3. If the 2 motor mounts (item 3 in
mounts to the engine with the 8 screws and 8 lock washers; torque the
screws to 32.5 to 56.9 N·m (24 to 42 ft-lb).
4. If the dual temperature switch was removed, apply pipe thread sealant to
the switch.
The engine is very heavy, and a hoist not rated for the weight of the
engine may fail, causing possible injury and damage to the engine.
Use hoist equipment rated to lift the engine, which is approximately
188 kg (414 lb).
Figure
16) and 7 lock washers that secure
Figure
16), snubbing washer, and screw that
IMPORTANT
CAUTION
Figure
IMPORTANT
Figure
16) were removed, install the 2 motor
CAUTION
Page 3–24
16) that secure the flywheel
Groundsmaster 7210
16222SL Rev C

Advertisement

Table of Contents
loading

Table of Contents