Toro Groundsmaster 7210 Service Manual page 317

Assembling the Blade Spindle (continued)
Groundsmaster 7210
16222SL Rev C
Note: A replacement bearing spacer set includes the inner spacer and outer
spacer (items 4 and 5 in
deck spindle to the another.
If new bearings are installed into a used spindle housing, it is not
necessary to replace the original large snap ring. If the original snap
ring is in good condition with no sign of damage (e.g., spun bearing),
leave the snap ring in the housing and discard the snap ring that
comes with the new bearings. If the large snap ring is damaged,
replace the snap ring.
g033718
1. Bearing
2. Spacer ring
3. Large snap ring
g033719
1. Bearing cup
2. Large snap ring
3. Outer spacer
Figure 223). Do not mix the bearing spacers from one
IMPORTANT
Figure 223
4. Inner spacer
5. Outer spacer
Figure 224
4. Arbor press
5. Support
6. Arbor press base
Page 7–13 Cutting Deck: Service and Repairs