Toro Groundsmaster 7210 Service Manual page 163

Assembling the Transmission (continued)
Groundsmaster 7210
16222SL Rev C
g033473
1. Accumulator piston
2. Accumulator collar
47. Lubricate the accumulator components with clean hydraulic fluid. Install the
piston, spring, and collar into the pump body.
Note: Ensure that the hole in the collar is toward the outside of the pump
body.
48. Align new gasket to the accumulator cover and secure the cover to the pump
body with the 2 bolts; torque the bolts to 23 to 26 N∙m (17 to 19 ft-lb).
g033474
1. Charge relief valve
2. Pressure valve
49. Lubricate the charge relief valve and spring with clean hydraulic fluid and
install them into the pump body.
50. Lubricate the pressure valve and spring with clean hydraulic fluid and install
them into the pump body.
51. Lubricate new O-rings and install the O-rings onto the charge relief plug and
pressure valve plug. Install the plugs into the pump body; torque the plugs to
23 to 26 N∙m (17 to 19 ft-lb).
Figure 113
3. Collar hole
4. Accumulator cover
Figure 114
3. Charge relief plug
4. Pressure valve plug
Page 4–103 Hydraulic System: Service and Repairs