Toro Groundsmaster 7210 Service Manual page 54

Removing the Engine
Diesel Engine: Service and Repairs
1. Park the machine on a level surface, lower the cutting deck (or implement),
shut off the engine, set the parking brake, and remove the key from the
key switch.
2. Remove the hood; refer to
g035026
1. Negative battery cable
2. Positive battery cable
g035041
1. Negative eye cable
2. Yanmar ECU
3. Positive eye cable
3. Disconnect both the battery cables at the battery. Disconnect the negative
battery cable (item 1 in
in Figure 17); refer to
4. Remove the ROPS assembly; refer to
System (page 6–33).
Removing the Hood (page
Figure 17
3. Engine block
Figure 18
4. Ground eye cable
5. Socket connector
6. Connector
Figure 17) and then the positive battery cable (item 2
Servicing the Battery (page
Removing the Rollover Protection
Page 3–22
6–40).
5–61).
Groundsmaster 7210
16222SL Rev C