Toro Groundsmaster 7210 Service Manual page 281

Disassembling the Front Castor Wheels (continued)
Groundsmaster 7210
16222SL Rev C
g033690
1. Locknut
2. Belleville washer
g033691
1. Bearing spacer
2. Seal
3. Bearing cone
1. Park the machine on a level surface, lower the cutting deck (or implement),
shut off the engine, set the parking brake, and remove the key from the
key switch.
Before lifting the machine with a jack, review and follow
Instructions (page 1–6).
2. Block the wheels with chocks. Use a jack to lift the front of the machine so
that the castor wheel can be removed.
3. Support raised machine with appropriate jack stands.
4. Remove the bolt (item 11 in
wheel to the castor fork, and remove the castor wheel assembly from the
machine.
5. Remove the grease cap (item 19 in
discard the cap.
Figure 197
3. Upper bearing cone
Figure 198
4. Bearing cup
5. Castor wheel
6. Castor spacer
IMPORTANT
Figure 196) and locknut that attach the castor
Figure 196) from the carrier frame, and
Page 6–19
Jacking
Chassis: Service and Repairs