MX480 Management, and Console Port Specifications
and Pinouts
IN THIS SECTION
RJ-45 Connector Pinouts for an MX Series Routing Engine ETHERNET Port | 210
RJ-45 Connector Pinouts for MX Series Routing Engine AUX and CONSOLE Ports | 211
RJ-45 Connector Pinouts for an MX Series Routing Engine ETHERNET Port
The port on the Routing Engine labeled ETHERNET is an autosensing 10/100-Mbps Ethernet RJ-45
receptacle that accepts an Ethernet cable for connecting the Routing Engine to a management LAN (or
other device that supports out-of-band management).
pinout.
Table 94: RJ-45 Connector Pinout for the Routing Engine ETHERNET Port
Pin
Signal
1
TX+
2
TX–
3
RX+
4
Termination network
5
Termination network
6
RX–
7
Termination network
8
Termination network
Table 94 on page 210
describes the RJ-45 connector
210