Juniper MX480 Hardware Manual page 301

Figure 99: RE-S-1800 Storage Drive Slots
Auxiliary Ethernet
port
port
Extractor Console
clip port
The following drive has been verified to work in the RE-S-1800 Routing Engine:
SSD-32G-RE-S
To replace a storage drive:
1. Disable and deactivate the storage drive.
2. Remove the storage drive.
a. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap
to an ESD point on the appliance.
For more information about ESD, see Preventing Electrostatic Discharge Damage in the hardware
guide for your router.
b. Unfasten the thumbscrew that secures the access door in front of the storage drive slots, and open
the door.
c. Slide the lock on the ejector to the unlocked position.
d. Carefully slide the drive out of the slot.
3. Reinstall a storage drive.
a. Carefully align the sides of the drive with the guides in the slot.
b. Slide the drive into the slot until you feel resistance, carefully ensuring that it is correctly aligned.
c. Close the access door and tighten the thumbscrew to secure the door.
SEE ALSO
Online/Offline SSD
button slot 1
Status LEDs
USB
port
SSD
slot 2
Extractor
clip
305