Figure 140: Installing an AC Power Supply in an MX480 Router
Replacing an MX480 AC Power Supply Cord
Disconnecting an MX480 AC Power Supply Cord | 395
1.
Connecting an MX480 AC Power Supply Cord | 396
2.
Disconnecting an MX480 AC Power Supply Cord
To disconnect the AC power cord:
1. Switch off the dedicated customer site circuit breaker for the power supply, and remove the power
cord from the AC power source. Follow the instructions for your site.
2. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other
end of the strap to the ESD point on the chassis.
3. Move the AC input switch next to the appliance inlet on the power supply to the off (O) position.
4. Remove the power cord from the power supply.
395