Maintaining Mx480 Interface Modules; Maintaining Mx480 Dpcs - Juniper MX480 Hardware Manual

Maintaining MX480 Interface Modules

IN THIS SECTION

Maintaining MX480 DPCs | 323

Holding an MX480 DPC | 326
Storing an MX480 DPC | 328
Replacing an MX480 DPC | 329
Replacing a Cable on an MX480 DPC, MPC, MIC, or PIC | 334
Maintaining MX480 FPCs | 338
Holding an MX480 FPC | 340
Storing an MX480 FPC | 344
Replacing an MX480 FPC | 345
Maintaining MX480 MICs | 351
Replacing an MX480 MIC | 352
Maintaining MX480 MPCs | 360
Replacing an MX480 MPC | 363
Maintaining MX480 PICs | 368
Replacing an MX480 PIC | 369
Replacing an MX480 AS MLC | 374
Replacing an MX480 AS MSC | 378
Replacing an MX480 AS MXC | 382
Maintaining Cables That Connect to MX480 DPCs, MPCs, MICs, or PICs | 384
Maintaining MX480 DPCs
Purpose
The router can have up to six Dense Port Concentrators (DPCs) mounted horizontally in the DPC card
cage at the front of the chassis. For optimum router performance, verify the condition of the DPCs.
Action
323