Fan Leds On The Mx480 Craft Interface; Mx480 Cable Management Brackets - Juniper MX480 Hardware Manual

Table 11: SCB LEDs on the Craft Interface
Label Color
OK Green
–
FAIL Red

Fan LEDs on the MX480 Craft Interface

The fan LEDs are located on the top left of the craft interface.
of the fan LEDs.
Table 12: Fan LEDs on the Craft Interface
Label Color
FAN Green
Red

MX480 Cable Management Brackets

The cable management brackets (see
dividers located on the left and right sides of each DPC, FPC, or MPC slot, and SCB slot. The cable
management brackets allow you to route the cables outside the router and away from the DPCs, MPCs,
MICs, PICs, and SCBs.
State Description
On SCB: Fabric and control board functioning
steadily normally.
Blinking SCB is transitioning online or offline.
Off The slot is not online.
On SCB has failed.
steadily
State Description
On Fan is functioning normally.
steadily
On Fan has failed.
steadily
Figure 6 on page 42
Table 12 on page 41 describes the functions
and Figure 7 on page 42) consist of plastic
41