Dc Power Cable Specifications For The Mx480 Router - Juniper MX480 Hardware Manual

DC Power Cable Specifications for the MX480 Router

DC Power Cable Lug Specifications—The accessory box shipped with the router includes the cable lugs
that attach to the terminal studs of each power supply (see
Figure 17: DC Power Cable Lug
End view
0.28
diameter
0.55
each hole
0.08 0.25 0.625
CAUTION:
lug to the grounding and power cables that you supply. A cable with an incorrectly
attached lug can damage the router.
NOTE: The same cable lug is used for the grounding cable.
DC Power Cable Specifications—Table 22 on page 62
which you must supply.
Table 22: DC Power Cable Specifications
Cable Type Quantity and Specification
Power Eight 6-AWG (13.3 mm
local code
2.25
Crimp area
All measurements in inches
0.37
Before router installation begins, a licensed electrician must attach a cable
2
), minimum 60°C wire, or as required by the
Figure 17 on page
6 AWG conductor
summarizes the specifications for the power cables,
62).
62