Maintaining Mx480 Power System Components; Maintaining The Mx480 Power Supplies - Juniper MX480 Hardware Manual

CAUTION:
before removing the MX-SPC3 again, removing an MX-SPC3 from a different
slot, or inserting an MX-SPC3 in a different slot.

Maintaining MX480 Power System Components

IN THIS SECTION

Maintaining the MX480 Power Supplies | 391

Replacing an MX480 AC Power Supply | 392
Replacing an MX480 AC Power Supply Cord | 395
Replacing an MX480 DC Power Supply | 396
Replacing an MX480 DC Power Supply Cable | 402
Maintaining the MX480 Power Supplies
Purpose
For optimum router performance, verify the condition of the power supplies.
Action
On a regular basis:
PEM 0 status:
State
Temperature
AC Input:
DC Output
PEM 1 status:
State
Temperature
AC Input:
After the OK/FAIL LED lights steadily, wait at least 30 seconds
Online
OK
OK
Voltage(V) Current(A)
59 0
Online
OK
OK
Power(W) Load(%)
0 0
391