Juniper MX480 Hardware Manual page 269

cli> configure
[edit]
root@#
5. Configure the name of the router. If the name includes spaces, enclose the name in quotation marks
(" ").
[edit]
root@# set system host-name host-name
6. Create a management console user account.
[edit]
root@# set system login user user-name authentication plain-text-password
New password: password
Retype new password: password
7. Set the user account class to super-user.
[edit]
root@# set system login user user-name class super-user
8. Configure the router's domain name.
[edit]
root@# set system domain-name domain-name
9. Configure the IP address and prefix length for the router's Ethernet interface.
[edit]
root@# set interfaces fxp0 unit 0 family inet address address/prefix-length
10. Configure the IP address of a backup router, which is used only while the routing protocol is not running.
[edit]
root@# set system backup-router address
272