Installation Instructions Warning; Mx480 Chassis Lifting Guidelines - Juniper MX480 Hardware Manual

Installation Instructions Warning

WARNING:
power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem met de
voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter les
directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an die
Stromquelle anschließen.
Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema a la red de
alimentación.
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.

MX480 Chassis Lifting Guidelines

The weight of a fully configured chassis is about 163.5 lb (74.2 kg). Observe the following guidelines for
lifting and moving the router:
Before moving the router, verify that the intended site meets the specified power, environmental, and
clearance requirements.
Do not attempt to lift a fully configured router by yourself. Using a mechanical lift to maneuver the
router into a rack is recommended. If a lift cannot be used, a minimum of two people must lift the router,
and you must remove components from the chassis before lifting.
Read the installation instructions before you connect the device to a
479