Upgrading An Mx480 To Use The Scbe-Mx - Juniper MX480 Hardware Manual

Bus Revision
FPGA Revision
CB 1 status:
State
Temperature
Power 1
1.2 V
1.5 V
1.8 V
2.5 V
3.3 V
5.0 V
12.0 V
1.25 V
3.3 V SM3
5 V RE
12 V RE
Power 2
11.3 V bias PEM
4.6 V bias MidPlane
11.3 V bias FPD
11.3 V bias POE 0
11.3 V bias POE 1
Bus Revision
FPGA Revision
SEE ALSO
Operating and Positioning the MX480 SCB Ejectors
Effect of Taking the MX480 Host Subsystem Offline
Taking an MX480 Host Subsystem Offline

Upgrading an MX480 to Use the SCBE-MX

This topic describes how to upgrade your MX960, MX480, or MX240 router to use the SCBE-MX without
taking the router offline. This "in-service" upgrade only works for MX routers with DPC, MS-DPC, MPC1,
MPC2, or MPC3 line cards. If your MX router has another type of line card, you'll need to take the router
offline before you do the upgrade.
6
0
Online Standby
26 degrees C / 78 degrees F
1211 mV
1517 mV
1817 mV
2507 mV
3312 mV
5136 mV
12142 mV
1260 mV
3306 mV
5085 mV
11968 mV
11369 mV
4814 mV
11427 mV
11350 mV
11330 mV
39
1
411