Mx480 Router Grounding Cable Specifications - Juniper MX480 Hardware Manual

Figure 44: Grounding Cable Lug
End view
0.28
diameter
0.55
each hole
0.08 0.25 0.625
CAUTION:
lug to the grounding and power cables that you supply. A cable with an incorrectly
attached lug can damage the router.
NOTE: The same cable lug is used for the DC power cables.

MX480 Router Grounding Cable Specifications

The grounding cable that you provide must meet the specifications in
Table 83: Grounding Cable Specifications
Cable Type Quantity and Specification
Grounding One 6-AWG (13.3 mm
code
WARNING:
location. It has a separate protective earthing terminal (sized for UNC 1/4-20 ground
lugs) provided on the chassis in addition to the grounding pin of the power supply cord.
This separate protective earthing terminal must be permanently connected to earth.
SEE ALSO
Tools and Parts Required for MX480 Router Grounding and Power Connections | 253
Grounding the MX480 Router | 253
2.25
Crimp area
All measurements in inches
0.37
Before router installation begins, a licensed electrician must attach a cable
2
), minimum 60°C wire, or as required by the local
The router is pluggable type A equipment installed in a restricted-access
6 AWG conductor
Table 83 on page
184
184.